enEN
BLOG

Always there for you

BLOG

Home >  BLOG

Eight tips for keeping your air compressor energy efficient

Time: 2022-06-17 13:56:23

Introduction:

Air compressor is one of the general equipment in the manufacturing industry, and doing a good job in energy-saving management of air compressors is an essential task to achieve enterprise power saving. In order to save the production cost of the enterprise, it is imperative for the enterprise to be equipped with energy-efficient air compressors.


So how to make the air compressor energy-saving?

1.Control screw compressor oil leakage:

Check regularly whether the interface and valve leak, deal with the leak point in time.

2. Pressure drop treatment:

Set up a pressure gauge through the pipeline segment to detect the pressure, check the pressure drop of each section of your section in detail, and check and maintain the problematic pipe network section in time.

3. Adjust the pressure matching of gas equipment:

Evaluate the pressure requirements of the gas equipment and reduce the discharge pressure of the air compressor as much as possible while ensuring production.

4. Adjust unreasonable gas consumption behavior:

According to authoritative data, the electric energy utilization rate of the air compressor is only about 10%, and about 90% is converted to heat energy loss, and it is necessary to evaluate the pneumatic equipment used in the factory and whether it can be solved by electric means. At the same time, we should also resolutely eliminate the use of compression wind to do routine cleaning work.

5. Adopt centralized control mode :

The number of air compressors is small, you can use a frequency conversion air compressor to regulate the pressure, if the number is large, you can use centralized linkage control to avoid the step-type discharge pressure rise caused by the parameter setting of multiple air compressors.

6. Do a good job in equipment maintenance and cleaning
Increase the heat dissipation effect of the air compressor, the exchange effect of the heat exchanger such as water cooling and air cooling, and keep the air compressor oil clean.

7. Waste heat recovery of air compressor:
Recovery of air compressor oil heat to prepare hot water for use in other processes or assisted living facilities.

8. Modification or replacement of drying system :
The new drying equipment uses air pressure air waste heat to dry and dehydrate the compressed air, and the energy saving rate exceeds 80%.


whatsapp