Home / PRODUCT / Compressed air treatment system / Air Treatment
Product introduction:
Compressor air oil/water separator is a new product developed by HOLYSUN, who absorbs & assimilates foreign advanced technology and construction. It’s internal is made of steel net foam and the housing is made of steel too. 1.0 Mpa pressure in general. HSD series compressor air oil/water separator adopts direct head off, inertial hit and Brown diffusion and condenser. It can remove dust, water and oil efficiently from the compressed air. And also can remove high capacity of water & oil can be used widely.
Working condition and technical data:
Inlet pressure: 0.2 ~ 1.0 Mpa
Inlet temperature: ≤5℃ ~ 65℃
Initial pressure drop: ≤ 0.005 Mpa
Filter route: 5 µm
Water removal rate: ≥99%
Outlet air oil content:: ≤0.01ppm
Model | SFU - 1 | SFU - 2 | SFU - 3 | SFU - 6 | SFU - 10 | SFU - 13 | SFU - 15 | SFU - 20 | SFU - 30 | SFU - 40 | SFU - 60 | |
Air treatment capacity (N m3/min) | 1.2 | 2.4 | 3.8 | 6.5 | 10.7 | 13.5 | 17 | 23 | 33 | 45 | 65 | |
Size of Air Connection | ZG1 | ZG1 | ZG1.5 | ZG1.5 | ZG 2 | DN65 | DN65 | DN80 | DN100 | DN125 | DN125 | |
Weight(kg) | 24 | 27 | 30 | 35 | 65 | 75 | 90 | 105 | 136 | 150 | 182 | |
Dimension (mm) | Length | 150 | 150 | 150 | 175 | 210 | 230 | 240 | 240 | 253 | 500 | 565 |
Width | 133 | 133 | 133 | 133 | 219 | 245 | 273 | 273 | 325 | 377 | 426 | |
Height | 530 | 530 | 530 | 571 | 1035 | 1139 | 1139 | 1200 | 1870 | 1870 | 2100 |