Home / PRODUCT / Air Compressor / High Pressure Air Compressor
Features:
Adopted the third generation asymmetric rotor technology. Screw rotor with SKF bearing by special heat treatment process. Air end and motor elastic connection, low noise, high transmission efficiency, no wearing parts.
The main part of joint use of stainless steel 304, ensure no corrosion during production and longer service life.
Stainless steel 316L plate cooler adopted, no corrosion in the interior, smaller size, higher cooling efficiency.
Internal integration of multi-level gas water separation system, the compressed air moisture content is low. Built up to 0.01μm precision filter to provide pure compressed air. With discharge temperature low than 25℃ and oil content less than 0.01ppm.
New structure air filter
Enlarged folding structure with less pressure difference and longer service life.
Composite core design with higher dust removal efficiency up to 99.99% and reduced the mechanical wear.
With differential pressure monitoring, timely remind maintenance, to ensure the stable operation of machine.
Oil gas separator with built-in oil core new structure.
Folding type oil gas separator with larger air treatment area, less pressure difference and longer service life. Composite core design lower the oil content after minimum pressure valve to less than 0.3ppm.
Independent high and low pressure oil filter
Easy to maintain with structure of rotary type. 10μm filter accuracy, greatly reducing the mechanical wear and improve the service life. With differential pressure monitoring, timely remind maintenance, to ensure the stable operation of machine.
New noise sound insulation cover:
Air compressor air inlet, electric control box cooling air inlet and cabinet cooling air inlet are all with external air intake. With a silencing structure, noise reduction effect is obvious. The air inlet and a detachable dust removal is convenient to maintain and prolong the maintenance cycle. Hinge door design, convenient maintenance, good sealing effect. Fully enclosed chassis sound insulation effect significantly, easy to clean.
Model | Working Pressure (Mpa) |
Air Delivery (m3/min) |
Motor Power (kW) |
Dimension (mm) |
Weight (kg) |
Noise db(A) |
Type of Cooling | Output pipe Diameter |
KEH55 | 2.0 | 5 | 45~55 | 2500*1600*2000 | 1380 | 73±5 | Air Cooling /Water Cooling |
DN40 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 | ||||||||
KEH75 | 2.0 | 6~7 | 55~75 | 2700*1600*2000 | 1750 | 75±5 | Air Cooling /Water Cooling |
DN40 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 | ||||||||
KEH90 | 2.0 | 8~9 | 75~90 | 3000*1800*2000 | 3750 | 75±5 | Air Cooling /Water Cooling |
DN50 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 | ||||||||
KEH110 | 2.0 | 10~11 | 90~110 | 3000*1800*2000 | 3900 | 76±5 | Water Cooling | DN50 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 | ||||||||
KEH132 | 2.0 | 12~13 | 110~132 | 3000*1800*2000 | 4260 | 78±5 | Water Cooling | DN50 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 | ||||||||
KEH160 | 2.0 | 14~15 | 110~160 | 3000*1800*2000 | 4400 | 78±5 | Water Cooling | DN50 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 | ||||||||
KEH180 | 2.0 | 16~17 | 132~185 | 3500*2000*2100 | 4500 | 79±5 | Water Cooling | DN65 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 | ||||||||
KEH200 | 2.0 | 18~19 | 160~200 | 3500*2000*2100 | 4600 | 79±5 | Water Cooling | DN65 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 | ||||||||
KEH220 | 2.0 | 20 | 160~220 | 3500*2000*2100 | 4650 | 79±5 | Water Cooling | DN65 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 | ||||||||
KEH250 | 2.0 | 25 | 220~250 | 4000*2200*2300 | 5000 | 80±5 | Water Cooling | DN80 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 | ||||||||
KEH300 | 2.0 | 30 | 250~300 | 4000*2200*2300 | 6500 | 80±5 | Water Cooling | DN80 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 | ||||||||
KEH335 | 2.0 | 35 | 300~375 | 4300*2350*2400 | 7300 | 81±5 | Water Cooling | DN100 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 | ||||||||
KEH400 | 2.0 | 40 | 350~450 | 4300*2350*2400 | 8000 | 81±5 | Water Cooling | DN100 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 | ||||||||
KEH450 | 2.0 | 45 | 375~450 | 4600*2450*2400 | 9000 | 81±5 | Water Cooling | DN100 |
2.5 | ||||||||
3.0 | ||||||||
3.5 | ||||||||
4.0 |